GATE Civil Engineering Syllabus
IITM will conduct GATE 2019 Exam on 02nd, 03rd, 09th & 10th February 2019. To know all topics that will be covered in exam, applicants need GATE Civil Engineering Syllabus. Topic Wise GATE CE Syllabus 2019 with detailed Weightage has been framed and prepared by Indian Institute Of Technology Madras.
There are total 28 subjects in Graduate Aptitude Test In Engineering and out of them one is Civil Engineering. Candidates, who’ve opted CE (Civil Engineering) as an optional subjects and want to start their preparation for GATE CE 2019, they can download GATE Civil Engineering Syllabus 2019 PDF through this page.
GATE 2019 Important Dates
| Conducting Body | Indian Institute Of Technology, Madras |
| GATE 2019 Registration Starts From | 01-09-2018 |
| End Date For GATE Registration | 21-09-2018 |
| Extended Closing Date | 01-10-2018 |
| GATE 2019 Exam Date | 02nd, 03rd, 09th & 10th February 2019 |
GATE Civil Engineering Exam Syllabus
GATE Syllabus for Civil Engineering plays an important role for exam preparation. Candidates must cover the entire GATE Civil Syllabus for Civil Engineering Exam, so that they will be able to answer every question in examination.
Those, who will get qualified by GATE, will be eligible to get admission into engineering courses. So, you should prepare for GATE as much as you can as according to GATE Civil Engineering Syllabus 2019 available below on this page of www.recruitmentinboxx.com
GATE Civil Engineering Syllabus
GATE CE Syllabus for General Aptitude (GA) – COMMON TO ALL PAPERS:
Verbal Ability: English grammar, sentence completion, verbal analogies, word groups, instructions, critical reasoning and verbal deduction.
Numerical Ability: Numerical computation, numerical estimation, numerical reasoning and data interpretation.
You Can Also Check Updated: GATE Syllabus
GATE Civil Engineering Syllabus 2019
In Civil Engineering CE Exam there are total seven sections are listed below and GATE Civil Syllabus is also provided on this page, must go through it:
- Engineering Mathematics
- Structural Engineering
- Geotechnical Engineering
- Water Resources Engineering
- Environmental Engineering
- Transportation Engineering
- Geomatics Engineering
GATE Civil Engineering Syllabus for Section 1: Engineering Mathematics
Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors.
Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima, Taylor and Maclaurin series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.
Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations; Laplace transform and its application in solving linear ODEs; initial and boundary value problems.
Partial Differential Equation (PDE): Fourier series; separation of variables; solutions of onedimensional diffusion equation; first and second order one-dimensional wave equation and two-dimensional Laplace equation.
Probability and Statistics: Definitions of probability and sampling theorems; Conditional probability; Discrete Random variables: Poisson and Binomial distributions; Continuous random variables: normal and exponential distributions; Descriptive statistics – Mean, median, mode and standard deviation; Hypothesis testing.
Numerical Methods: Accuracy and precision; error analysis. Numerical solutions of linear and non-linear algebraic equations; Least square approximation, Newton’s and Lagrange polynomials, numerical differentiation, Integration by trapezoidal and Simpson’s rule, single and multi-step methods for first order differential equations
GATE Civil Engineering Mathematics Syllabus – Weightage
| Subject | Topics | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | ||
| Engineering Mathematics | Linear Algebra | 2 | 4 | 4 | 3 |
| Calculus | 3 | 4 | 2 | 4 | |
| Ordinary Differential Equation (ODE) | 4 | 1 | 4 | 2 | |
| Partial Differential Equation (PDE) | |||||
| Probability and Statistics | – | 3 | 3 | 2 | |
| Numerical Methods | – | 1 | 2 | – | |
| Total | 9 | 13 | 15 | 12 | |
Must Read: Tips to Crack GATE Exam
GATE Civil Engineering Syllabus for Section 2: Structural Engineering
Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Friction and its applications; Kinematics of point mass and rigid body; Centre of mass; Euler’s equations of motion; Impulse-momentum; Energy methods; Principles of virtual work.
Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; Theories of failures; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, buckling of column, combined and direct bending stresses.
Structural Analysis: Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams, cables and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.
Construction Materials and Management: Construction Materials: Structural steel – composition, material properties and behaviour; Concrete – constituents, mix design, short-term and long-term properties; Bricks and mortar; Timber; Bitumen. Construction Management: Types of construction projects; Tendering and construction contracts; Rate analysis and standard specifications; Cost estimation; Project planning and network analysis – PERT and CPM.
Concrete Structures: Working stress, Limit state and Ultimate load design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete; Analysis of beam sections at transfer and service loads.
Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam- columns, column bases; Connections – simple and eccentric, beam-column connections, plate girders and trusses; Plastic analysis of beams and frames.
GATE Structural Engineering Syllabus – Weightage
| Section | Subjects | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | ||
| Structural Engineering | Engineering Mechanics | 2 | 2 | 2 | – |
| Solid Mechanics | 6 | 3 | 6 | 9 | |
| Structural Analysis | 4 | 5 | 7 | 3 | |
| Construction Materials and Management | 2 | 1 | 2 | 6 | |
| Concrete Structures | 6 | 6 | 3 | 3 | |
| Steel Structures | 4 | 6 | 2 | 2 | |
| Total | 24 | 23 | 22 | 23 | |
GATE Civil Engineering Syllabus for Section 3: Geotechnical Engineering
Soil Mechanics: Origin of soils, soil structure and fabric; Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Darcy’s law; Seepage through soils – two-dimensional flow, flow nets, uplift pressure, piping; Principle of effective stress, capillarity, seepage force and quicksand condition; Compaction in laboratory and field conditions; Onedimensional consolidation, time rate of consolidation; Mohr’s circle, stress paths, effective and total shear strength parameters, characteristics of clays and sand.
Foundation Engineering: Sub-surface investigations – scope, drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – finite and infinite slopes, method of slices and Bishop’s method; Stress distribution in soils – Boussinesq’s and Westergaard’s theories, pressure bulbs; Shallow foundations – Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – types of piles, dynamic and static formulae, load capacity of piles in sands and clays, pile load test, negative skin friction.
GATE CE Syllabus – Weightage
| Section | Topics | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | ||
| Geotechnical Engineering | Soil Mechanics | 9 | 12 | 12 | 9 |
| Foundation Engineering | 5 | 3 | 3 | 4 | |
| Total | 14 | 15 | 15 | 13 | |
Also Check: GATE Previous Year Question Paper
GATE Civil Engineering Syllabus for Section 4: Water Resources Engineering
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum, energy and corresponding equations; Potential flow, applications of momentum and energy equations; Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth.
Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Kinematics of flow, velocity triangles; Basics of hydraulic machines, specific speed of pumps and turbines; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, slope profile, hydraulic jump, uniform flow and gradually varied flow.
Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity, reservoir and channel routing, surface run-off models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s law.
Irrigation: Duty, delta, estimation of evapo-transpiration; Crop water requirements; Design of lined and unlined canals, head works, gravity dams and spillways; Design of weirs on permeable foundation; Types of irrigation systems, irrigation methods; Water logging and drainage; Canal regulatory works, cross-drainage structures, outlets and escapes.
GATE Water Resources Engineering Syllabus – Weightage
| Section | Subjects | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | ||
| Water Resources Engineering | Fluid Mechanics & Hydraulics | 10 | 7 | 8 | 5 |
| Hydrology | 5 | 3 | 3 | 7 | |
| Irrigation | 0 | 2 | 2 | 2 | |
| Total | 15 | 12 | 13 | 14 | |
GATE Civil Engineering Syllabus for Section 5: Environmental Engineering
Water and Waste Water: Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater, Primary, secondary and tertiary treatment of wastewater, effluent discharge standards, Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment, Unit operations and unit processes of domestic wastewater, sludge disposal
Air Pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).
Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.
GATE Civil Syllabus – Weightage
| Subject | Topics | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | ||
| Environmental Engineering | Water & Waste Water | 6 | 5 | 7 | 6 |
| Air Pollution & Noise Pollution | 3 | 2 | – | 3 | |
| Solid Waste Management | 1 | 3 | 3 | 2 | |
| Total | 15 | 12 | 13 | 14 | |
Get Here Complete: GATE Study Material
GATE Civil Engineering Syllabus for Section 6: Transportation Engineering
Transportation Infrastructure: Highway alignment and engineering surveys; Geometric design of highways – cross-sectional elements, sight distances, horizontal and vertical alignments; Geometric design of railway track; Airport runway length, taxiway and exit taxiway design.
Highway Pavements: Highway materials – desirable properties and quality control tests; Design of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible pavement using IRC: 37-2012; Design of rigid pavements using IRC: 58-2011; Distresses in concrete pavements.
Traffic Engineering: Traffic studies on flow, speed, travel time – delay and O-D study, PCU, peak hour factor, parking study, accident study and analysis, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Control devices, signal design by Webster’s method; Types of intersections and channelization; Highway capacity and level of service of rural highways and urban roads.
GATE Exam Syllabus – Weightage
| Subject | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | |
| Transportation Engineering | 9 | 9 | 7 | 9 |
GATE Civil Engineering Syllabus for Section 7: Geomatics Engineering
Principles of surveying; Errors and their adjustment; Maps – scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry – scale, flying height; remote sensing – basics, platform and sensors, visual image interpretation; Basics of Geographical information system (GIS) and Geographical Positioning system (GPS)
GATE CE Syllabus – Weightage
| Subject | Paper 2018 (Weightage) | Paper 2017 (Weightage) | ||
| Set 1 | Set 2 | Set 1 | Set 2 | |
| Geomatics/Surveying | 4 | 4 | 4 | 5 |
GATE Civil engineering (CE) Exam Pattern 2018
General Details Of Exam Pattern:
The GATE exam will consist of a single paper of 3-hour duration in which it includes 65 questions carrying a maximum of 100 marks. Question in GATE exam will consist of both multiple choice questions (MCQ) and numerical answer type (NAT) questions. For the entire papers ONLINE Computer Based Test (CBT) mode where the candidates will be shown the questions in a random sequence on a computer screen. Students are advised to select the answer (for MCQ type) and enter the answer for numerical answer type question using a mouse on a virtual keyboard (keyboard of the computer will be disabled). At the end of the 3-hour window, the computer will automatically close the screen from further actions.
Allocation of marks according to sections
| Subject | Allocation of Marks |
| Engineering Mathematics | 15% of Total Marks |
| General Aptitude | 15% of Total Marks |
| Subject Questions | 70% of Total Marks |
Types of Questions in GATE 2019:
GATE 2019 would contain questions of two different types in various papers
- Multiple Choice Questions (MCQ):
These carry 1 or 2 marks each in all papers and sections. These questions are objective in nature, and each will have a choice of four answers, out of which the candidate has to mark the correct answer(s).
- Numerical Answer Questions:
These carry 1 or 2 marks each in all papers and sections. For these questions the answer is a real number, to be entered by the candidate using the virtual keypad. No choices will be shown for this type of questions.
Get More Details on: GATE Exam Pattern
GATE Civil Engineering Syllabus PDF – General Aptitude (Mandatory):
| Total Questions asked | 10
|
| Total marks | 15 marks |
| Questions asked from | verbal and numerical ability |
| Verbal Ability Syllabus |
|
| Numerical Ability |
|
GATE Civil Engineering Syllabus- Engineering Mathematics (Mandatory):
- Linear Algebra
- Calculus
- Ordinary Differential Equation (ODE)
- Partial Differential Equation (PDE)
- Probability and Statistics
- Numerical Methods.
Downloading Steps To Get PDF of GATE Civil Engineering Syllabus
Here, we’ve added some guidelines to download GATE Civil Syllabus, candidates are required to follow it and download GATE CE Syllabus PDF
- For every interested applier, it is required to login to official website of GATE that is www.gate.iitm.ac.in
- After reaching at web portal, hit the “Pre Exam” tab from top menu bar for downloading GATE Civil Engineering Exam Syllabus.
- Now, for downloading GATE Syllabus For Civil Engineering, hit on that tab and press on “Syllabi” tab from drop down list.
- A list of GATE Syllabus will appear on your screen, hit “CE: Civil Engineering” link for GATE Civil Engineering Syllabus PDF.
- Go through downloaded GATE CE Syllabus 2019 PDF carefully and check GATE Civil Syllabus according to your applied course.
- At last take hard copy of GATE Syllabus For Civil Engineering and keep GATE CE Syllabus safe as it will be beneficial for you while you are preparing for exams.
Press Here For Downloading GATE Civil Engineering Syllabus 2019
Press Here For GATE Official Link
Note:
For more details you can check the Official Link regarding GATE Civil Engineering Syllabus 2019 and stay in contact with our web portal of www.recruitmentinboxx.com to collect latest information about GATE Civil Syllabus.
You May Also Like To Visit This Section
| GATE Application Form | GATE Result |
| GATE Admit Card | GATE Eligibility Criteria |
| GATE Score Card | GATE Cut Off |
| Best GATE Coaching Center | GATE Rank Predictor |
| GATE Answer Key | GATE Exam |