IES Previous Year Question Papers
Latest and Old IES Previous Year Question Papers are available here to download. UPSC IES ESE Model Papers are meant to give the trend of the questions being asked in the examination. With help of below links, candidates can download IES Previous Year Question Papers PDF according to year.
UPSC IES Previous Year Question Papers (Pre/ Mains) are also meant to allow applicants to work on their speed, efficiency and time management skills which are extremely necessary while appearing in exam.
IES Preliminary Exam Date 2019!!!
UPSC IES Preliminary Exam for will be held by Union Public Service Commission on 06th January 2019. Applicants can start their preparation with the help of IES ESE Previous Year Question Papers.
Further information about IES Previous Year Question Papers Online is mentioned below by the team of www.recruitmentinboxx.com Must have a look below for IES Previous Year Question Paper!!!
IES Previous Year Question Papers
IES Previous Year Question Papers 2018
IES Pre Previous Year Question Papers:
IES Previous Year Question Papers for Civil Engineering | Download PDF |
Electrical Engineering Paper | Download PDF |
Electronics and Telecommunication Engineering Paper | Download PDF |
General Studies and Engineering Aptitude Paper | Download PDF |
IES Sample Paper for Mechanical Engineering Paper | Download PDF |
IES Mains Previous Year Question Papers:
IES Previous Papers With Solutions For Civil Paper – I | Download PDF |
Civil Engineering Paper – II | Download PDF |
IES Previous Papers With Solutions For Mechanical Paper – I | Download PDF |
Mechanical Engineering Paper – II | Download PDF |
Electrical Engineering Paper – I | Download PDF |
Electrical Engineering Paper – II | Download PDF |
Electronics and Tele. Engineering Paper – I | Download PDF |
IES Previous Year Question Papers for Electronics and Tele. Engineering Paper – II | Download PDF |
IES Previous Year Question Papers 2017
IES Previous Year Papers for Pre Exam:
IES General Ability Previous Year Question Papers With Answers and Engineering Aptitude | Download PDF |
Civil Engineering | Download PDF |
Mechanical Engineering | Download PDF |
IES Previous Year Question Papers for Electrical Engineering | Download PDF |
Electronics & Telecommunication Engineering | Download PDF |
IES Model Paper for Main Exam:
Civil Engineering Paper – I | Download PDF |
IES Previous Year Question Papers for Civil Engineering Paper – II | Download PDF |
IES Previous Year Solved Papers Electrical Engineering Paper – I | Download PDF |
Electrical Engineering Paper – II | Download PDF |
Mechanical Engineering Paper – I | Download PDF |
Mechanical Engineering Paper – II | Download PDF |
Electronics and Telecommunication Engineering Paper – I | Download PDF |
Electronics and Telecommunication Engineering Paper – II | Download PDF |
IES Previous Year Question Papers 2016
IES Sample Question Paper for Conventional
Civil Engineering Paper – I | Download PDF |
IES Previous Year Question Papers for Civil Engineering Paper – II | Download PDF |
Mechanical Engineering Paper – I | Download PDF |
Mechanical Engineering Paper – II | Download PDF |
Electrical Engineering Paper – I | Download PDF |
Electrical Engineering Paper – II | Download PDF |
E & T Engineering Paper – I | Download PDF |
IES Solved Paper for E & T Engineering Paper – II | Download PDF |
IES Previous Year Papers for Objective:
IES Previous Year Question Papers for Civil Engineering Paper – I | Download PDF |
Civil Engineering Paper – II | Download PDF |
Mechanical Engineering Paper – I | Download PDF |
IES Mechanical Previous Papers Paper – II | Download PDF |
Electrical Engineering Paper – I | Download PDF |
Electrical Engineering Paper – II | Download PDF |
E & T Engineering Paper – I | Download PDF |
IES Previous Question Paper for E & T Engineering Paper – II | Download PDF |
IES Previous Papers With Solutions
Question-1: Pick up the correct statement from the following:
- For thin structures subjected to wetting and drying, the water cement ratio should be 0.45
- For mass concrete structures subjected to wetting and drying, the water ratio should be 0.55
- For thin structures which remain continuously under water, the water-cement ratio by weight should be 0.55
- For massive concrete structures which remain continuously under water, the water cement ratio by weight should be 0.65
- All the above.
Answer: 5
Question-2: The theory of infiltration capacity was given by
- Merrill Bernard
- W. Horner
- Le-Roy K. Shermen
- Robert E. Horten.
Answer: 4
Question-3: Which of the following is an equation of linear motion?(where, u and v = Initial and final velocity of the body, a = Acceleration of the body, and s = Displacement of the body in time t seconds.)
- v = u + a.t
- s = u.t + 1/2 a.t2
- v2 = u2+2a.s
- all of these
Answer: 4
Get Here UPSC ESE Exam Syllabi: IES Syllabus
Question-4: The force required to move the body up the plane will be minimum if it makes an angle with the inclined plane __________ the angle of friction.
- equal to
- less than
- greater than
Answer: 1
Question-5: Power required to drive a centrifugal pump is directly proportional to __________ of its impeller.
- diameter
- square of diameter
- cube of diameter
- fourth power of diameter
Answer: 4
Question-6: Scientific notation is a method
- of expressing a very large number
- of expressing a very small number
- used to make calculations with large and small numbers
- All of the above
Answer: 4
Question-7: If you drop a 5 when rounding a number, you are using the
- round-to-even rule
- significant digit rule
- round-off rule
- retained digit rule
Answer: 1
Get List Of: Best Books for IES Preparation
Question-8: Economic goods are
- all commodities that are limited in quantity as compared to their demand
- Commodities that is available according to their demand
- Commodities that is available more as compared to demand
- None of the above
Answer: 1
Question-9: For purifying drinking water alum is used
- for coagulation of mud particles
- to kill bacteria
- to remove salts
- to remove gases
Answer: 1
Question-10: ESCAP stands for
- Economic and Social Commission for Asia and Pacific
- European Society Council for Africa and Pacific
- Economic and Social Commission for Africa and Pacific
- None of the above
Answer: 1
Question-11: The work or surface speed for cylindrical grinding varies from
- 5 to 10 m/min
- 10 to 20 m/min
- 20 to 30 m/min
- 40 to 60 m/min
Answer: 3
Check Out: Best IES Coaching Centers
Question-12: The lip angle of a single point tool is usually
- 20° to 40°
- 40° to 60°
- 60° to 80°
- none of these
Answer: 3
Question-13: The lead screw of a lathe has __________ threads.
- single start
- double start
- multi-start
- any one of these
Answer: 1
Question-14: Lapping is an operation of
- making a cone-shaped enlargement of the end of a hole
- smoothing and squaring the surface around a hole
- sizing and finishing a small diameter hole
- producing a hole by removing metal along the circumference of a hollow cutting tool
Answer: 3
Question-15: In hot machining, tool is made of
- tungsten carbide
- brass or copper
- diamond
- stainless steel
Answer: 1
Get Here in Detail: IES Civil Engineering Syllabus
Question-16: Pick up the correct statement from the following:
- Landing speed is directly proportional to the wing loading
- Wing loading remaining constant, the take off distance is directly proportional to the powder loading
- Neither (a) nor (b)
- Both (a) and (b)
Answer: 4
Question-17: The meterological condition which influences the size and location of an air port is
- atmosphere pressure
- air density
- reduced level
- wind direction
- all the above.
Answer: 5
Question-18: Conical surface of the approach area rises outwards
- 1 in 10
- 1 in 15
- 1 in 20
- 1 in 25
Answer: 3
Question-19: For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is
- 25 m
- 50 m
- 75 m
- 100 m
Answer: 4
Question-20: From the end of an instrumental runway, the approach surface rises outwards
- 1 in 20
- 1 in 30
- 1 in 40
- 1 in 50
Answer: 4
Check Out Marking Scheme in Detail: UPSC IES Exam Pattern
How to Download IES Previous Year Question Papers ?
- Firstly, candidates need to visit the official website of Union Public Service Commission i.e. www.upsc.gov.in.
- After that select “Examination” tab which is mentioned at the menu bar.
- Choose “Previous question papers” option from the drop list.
- Within few seconds you will be redirected on a new page.
- Select the appropriate link in which subject you are interested.
- A PDF file will be shown on your digital screen which contains UPSC IES Previous Year Question Papers.
- Check it out and download the same.
- At the end, take a hard copy of the Indian Engineering Services Exam Previous Year Question Papers for further use.
Press Here For IES Previous Year Question Papers Link
Interested individuals can download the ESE Last 5 Year’s Papers with Solution by hitting the available links. For better preparation, you can attend online mock test. This technique will improve your accuracy and knowledge.
Also Get Here: IES Admit Card
Final Words:
Stay tuned with the team of www.recruitmentinboxx.com or follows us on social media to get latest updates on IES Previous Year Question Papers. Clear your doubts regarding IES Question papers (if any) by write it in the mentioned below comment box, our experts will try their best to solve it.
You May Also Like To Check This Section