Home / Question Paper 2023 / TANCET Question Papers 2022 PDF MBA/Engg Previous Sample Papers

TANCET Question Papers 2022 PDF MBA/Engg Previous Sample Papers

TANCET Question Papers

Prepare for the upcoming Tamil Nadu Common Entrance Test (TANCET 2022) by practicing TANCET Question Papers available in this page. Download TANCET Sample Papers and TANCET Previous Year Question Papers PDFs for MBA/Engineering programmes and prepare for you exam effectively and efficiently. 

TANCET is state level common entrance examination conducted by the Anna University of Chennai for admissions in Post-Graduate courses in the state university’s affiliated colleges in Tamil Nadu.  Here, on this page, we have provided TANCET previous year sample papers for the courses of MBA/Engg. So candidates can hit the direct link available in below section and get the TANCET Question Papers 2022 PDF.

TANCET Previous Year Paper:

State government of Tamil Nadu conducts the TANCET exam every year in the month of March. Those candidates, who belong to outside the state of Tamil Nadu and want to get admission in Anna University, can also apply for the exam.

Previous year papers of the TANCET exam will help a lot to crack the entrance examination. For more information about the TANCET Question Papers 2022, candidates should go through this page which is created by team of www.recruitmentinboxx.com.

TANCET Question Papers

Direct links to download TANCET Question papers PDF

Engineering Mathematics Paper 1  Download
Engineering Mathematics Paper 2 Download
Basic Engineering & Sciences 1 Download
Basic Engineering & Sciences 2 Download
Aeronautical & Aerospace Engineering 1 Download
Aeronautical & Aerospace Engineering 2 Download
Agricultural & Irrigation Engineering 1 Download
Agricultural & Irrigation Engineering 2 Download
Architecture 1 Download
Architecture 2 Download
Automobile Engineering 1 Download
Automobile Engineering 2 Download
Biomedical Engineering 1 Download
Biomedical Engineering 2 Download
Biotechnology 1 Download
Biotechnology 2 Download
Chemical Engineering 1 Download
Chemical Engineering 2 Download
Civil Engineering 1 Download
Civil Engineering 2 Download
Computer Science & Engineering and
Information Technology 1
Download
Computer Science & Engineering and
Information Technology 2
Download
Physics 1 Download
Physics 2 Download
Earth Sciences 1 Download
Earth Sciences 2 Download
Electrical & Electronics Engineering 1 Download
Electrical & Electronics Engineering 2 Download
Electronics & Communication Engineering 1 Download
Electronics & Communication Engineering 2 Download
Geo-Informatics 1 Download
Geo-Informatics 2 Download
Instrumentation, Electronics & Control Engineering 1 Download
Instrumentation, Electronics & Control Engineering 2 Download
Leather Technology 1 Download
Leather Technology 2 Download
Material Science & Ceramic Technology 1 Download
Material Science & Ceramic Technology 2 Download
Mathematics 1 Download
Mathematics 2 Download
Printing Technology 1 Download
Printing Technology 2 Download
Production & Industrial Engineering 1 Download
Production & Industrial Engineering 2 Download
Social Sciences 1 Download
Social Sciences 2 Download
Textile Technology 1 Download
Textile Technology 2 Download
Mechanical Engineering 1 Download
Mechanical Engineering 2 Download

Press Here For TANCET Official Link

Q.1) According to principle of conservation of energy, the total momentum of a system of masses in any direction remains constant unless acted upon by an external force in that direction.

  1. True
  2. False

Ans. 2

Q.2) The friction experienced by a body, when in motion, is known as

  1. Rolling friction
  2. Dynamic friction
  3. Limiting friction
  4. Static friction

Ans. 2

Must Check: TANCET Preparation Books

Q.3) Two balls of equal mass and of perfectly elastic material are lying on the floor. One of the ball with velocity v is made to struck the second ball. Both the balls after impact will move with a velocity

  1. v
  2. v/2
  3. v/4
  4. v/8

Ans. 2

Q.4) The term ‘force’ may be defined as an agent which produces or tends to produce, destroys or tends to destroy motion.

  1. Agree
  2. Disagree

Ans.1

Q.5) The coefficient of restitution for elastic bodies is one.

  1. Correct
  2. Incorrect

Ans.2

Q.6) The velocity ratio in case of an inclined plane inclined at angle θ to the horizontal and weight being pulled up the inclined plane by vertical effort is

  1. sin θ
  2. cos θ
  3. tan θ
  4. cosec θ

Ans. 1

Q.7) The range of projectile on a downward inclined plane is __________ the range on upward inclined plane for the same velocity of projection and angle of projection.

  1. Less than
  2. More than
  3. Equal to

Ans. 2

Q.8)  The angle of inclination of a vehicle when moving along a circular path __________ upon its mass.

  1. Depends
  2. Does not depend

Ans. 2

Q.9) If the resultant of two equal forces has the same magnitude as either of the forces, then the angle between the two forces is

  1. 30°
  2. 60°
  3. 90°
  4. 120°

Ans. 4

Q.10) A smooth cylinder lying on its convex surface remains in __________ equilibrium.

  1. stable
  2. unstable
  3. neutral

Ans. 2

Read Out Complete Detailed: TANCET Syllabus

Q.11) Coefficient of friction is the ratio of the limiting friction to the normal reaction between the two bodies.

  1. Yes
  2. No

Ans.1

Q.12) The softness or hardness of a grinding wheel depends upon the type & amount of bonding material used. For general purpose cutter grinding __________ grinding wheel is normally used.

  1. hard
  2. soft
  3. silicon carbide
  4. aluminium oxide

Ans. 4

Q.13) Tin based white metals are used, where bearings are subjected to

  1. high pressure & load.
  2. low pressure & load.
  3. high temperature.
  4. large surface wear.

Ans. 1

Q.14) Friction factor for fluid flow in pipe does not depend upon the

  1. pipe length.
  2. pipe roughness.
  3. fluid density & viscosity.
  4. mass flow rate of fluid.

Ans. 1

Q.15) All of the following alloying elements of steel increases hardness but sacrifice ductility, except

  1. nickel
  2. vanadium
  3. molybdenum
  4. chromium

Ans. 1

Q.16) The following type of bonding is strongly directional in solids.

  1. Vander Waal’s
  2. Ionic
  3. Metallic
  4. Covalant

Ans. 4

Q.17) Fog is an example of colloidal system of

  1. solid dispersed in gas.
  2. solid dispersed in liquid.
  3. liquid dispersed in gas.
  4. gas dispersed in liquid.

Ans. 3

Q.18) Chromium molybdenum steel can not be welded using __________ welding.

  1. thermit
  2. electrical resistance
  3. oxy-acetylene
  4. any of these

Ans. 2

Q.19) Speisses is a mixture of the following:

  1. Arsenides of heavy metals.
  2. Antimonides of heavy metals.
  3. Arsenides & antimonides of heavy metals.
  4. Iron, cobalt and nickel.

Ans. 1

Q.20) Auto collimator is used to check

  1. flatness
  2. angle
  3. rotor balancing
  4. roughness

Ans.2

These are the Previous Year Question paper with solution that will help the candidate to prepare exams in better way. Visitors may also subscribe free email service of our web portal www.recruitmentinboxx.com for getting latest details regarding TANCET Question Papers 2022. You can also follow us on Facebook and Google plus to get updates on your timeline.

Jobs By Qualification

Archives

Text

Text

Text

Text